| Types, Dimensions, and Technical Specifications | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Product | ||||||||||
| Thickness | Width (mm) | Length (mm) | Inner Diameter (mm) | Outer Diameter (mm) | Weight (ton) | Technical Specifications | Area in Dimensions | |||
| ASTM | EN 10130 | AISI | ||||||||
| Coils | 3.2/0.4 | 1270/6000 | – | 610 | 1500 | 10-2 tons | 1008 to 1012 | DC 01 DC 02 DC 03 DC 04 | A 619 DQ A 620 DDQ | EN10051 EN10140 |
| Sheets | 4000/1000 | – | – | 10-2 tons | ||||||
| Coils | 2.5/0.4 | 80 minimum | – | 610 | 1500 | – | ||||
| Steel Quality | Product Type | Chemical Composition of Molten Steel (%) | Mechanical Properties | Equivalent Global Standards | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Carbon Max | Silicon Max | Manganese Max | Phosphorus Max | Sulfur Max | Aluminum Max | Yield Strength (N/mm²) | Tensile Strength (N/mm²) | Elongation Min | Hardness (Min) | Ductility Test (mm) for Thickness (mm) Min | ||||||||
| Standard Length 80 mm | Standard Length 50 mm | HR8 | HRN-30 | 0.5 | 1.0 | 1.5 | 2.0 | |||||||||||
| General Construction Purposes | 12 MPa | 0.12 | 0.20 | 0.60 | 0.04 | 0.04 | 0.01 | Min 215 | 350 to 510 | 20 | 22 | 20 | – | – | – | – | – | EN 10130: EN 10139: DC 01 DC 03 DC 04 |
| Drawing Purposes | 10 MPa | 0.10 | 0.03 | 0.30 | 0.04 | 0.04 | 0.02 | Max 280 | 270 to 410 | 28 | 30 | 65 | 60 | 8.8 | 9.8 | 10.5 | 11.1 | |
| Deep Drawing Purposes | 10 MPa | 0.08 | 0.03 | 0.25 | 0.03 | 0.03 | 0.02 | Max 240 | 270 to 370 | 34 | 36 | 55 | 53 | 9.5 | 10.5 | 11 | 11.8 | |
| Types, Dimensions, and Technical Specifications | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Product | ||||||||||
| Thickness | Width (mm) | Length (mm) | Inner Diameter (mm) | Outer Diameter (mm) | Weight (ton) | Technical Specifications | Area in Dimensions | |||
| ASTM | EN 10130 | AISI | ||||||||
| Coils | 3.2/0.4 | 1270/6000 | – | 610 | 1500 | 10-2 tons | 1008 to 1012 | DC 01 DC 02 DC 03 DC 04 | A 619 DQ A 620 DDQ | EN10051 EN10140 |
| Sheets | 4000/1000 | – | – | 10-2 tons | ||||||
| Coils | 2.5/0.4 | 80 minimum | – | 610 | 1500 | – | ||||
| Steel Quality | Product Type | Chemical Composition of Molten Steel (%) | Mechanical Properties | Equivalent Global Standards | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Carbon Max | Silicon Max | Manganese Max | Phosphorus Max | Sulfur Max | Aluminum Max | Yield Strength (N/mm²) | Tensile Strength (N/mm²) | Elongation Min | Hardness (Min) | Ductility Test (mm) for Thickness (mm) Min | ||||||||
| Standard Length 80 mm | Standard Length 50 mm | HR8 | HRN-30 | 0.5 | 1.0 | 1.5 | 2.0 | |||||||||||
| General Construction Purposes | 12 MPa | 0.12 | 0.20 | 0.60 | 0.04 | 0.04 | 0.01 | Min 215 | 350 to 510 | 20 | 22 | 20 | – | – | – | – | – | EN 10130: EN 10139: DC 01 DC 03 DC 04 |
| Drawing Purposes | 10 MPa | 0.10 | 0.03 | 0.30 | 0.04 | 0.04 | 0.02 | Max 280 | 270 to 410 | 28 | 30 | 65 | 60 | 8.8 | 9.8 | 10.5 | 11.1 | |
| Deep Drawing Purposes | 10 MPa | 0.08 | 0.03 | 0.25 | 0.03 | 0.03 | 0.02 | Max 240 | 270 to 370 | 34 | 36 | 55 | 53 | 9.5 | 10.5 | 11 | 11.8 | |
The Libyan Iron and Steel Company is one of the largest industrial companies in Libya, and is distinguished by producing high-quality iron and steel products to meet the needs of the local and regional market.